|
|
|
How
it works? |
|
| SET-UP Carburetor is extremely easy, in fact is sufficient to select the
setting of the carburetor (low screw, high screw or main jet,
opening pressure, closing pressure). |
| Immediately the software shows you how your carburation is positioned regarding the optimal carburation, in relation to the engine, weather and track characteristics. |
| The software supplies you the indications to modify the calibration to obtain that optimal. |
|
Versions |
 EXPERIENCE |
| It's the new generation of software for
the fine tuning of the diaphragm carburetor,
studied for mechanics, technicians, and tuners, that want find new
carburetor setting, acting also on the tension inlet spring, and on
the needle seat diameter. Click here for the presentation |
BASIC |
 |
| Basic is the
ideal version to begin to use a calculation
tool to manage the carburation and then have a valid technical support who can help you to quickly locate the most appropriate choices for
carburetor fine-tuning. In fact, this version allows you to
see the status of your carburation and provides you
the indications on how to change the setting to get the best compromise in all
operating conditions under varying weather conditions. |
|
|
|
|
PRO |
 |
| Pro is the version most sold for use on the track during the race week
end. In fact this version further to suggest how to change
the calibration when changing weather conditions, also allows you to perform of refinements to take account of the effects on carburation of the characteristics of the track (maximum speed,
transmission ratio, grip) and of the driving style of the driver. The software as well as recommend actions that you
must make, also automatically calculates the calibration changes (idle jet,
main jet, etc.) most appropriate to have an optimal
carburation in the conditions that you have entered, so you can have the
maximun rapidity and efficacy, even with limited time available. |
|
|
|
|
|
System Requirements |
Support |
User License |
| The software can be used on any computer with Windows operating system. It 'was designed to be used on screens with minimum resolution 800 x 600 pixels, so it can be easily used even on small notebook or netbook. |
|
| NT-Project follows you at all stages, from installation, to the early stages of use, both
to give you advice on the operation, and to give you guidance as to the most suitable settings for your case, so as to allow you to take full advantage of the high potential of the software. |
|
| The license to use the software allows 2 installations, furthermore in case of computer failure it's possible a re-installation within 24 months. |
FAQ |
|
| |
Models |
|
|
|
